-40%
Outboard Fuel Meter Boat GPI Flow Flowmeter Electronic Marine Turbine Digital
$ 105.59
- Description
- Size Guide
Description
Outboard Fuel MeterOutboard Fuel Meter Boat GPI Flow Flowmeter Electronic Marine Turbine Digital
Product features
Auto-off display turns off after 1 minute of inactivity to extend battery life. Flow range of 3 to 30 GPM (10 to 100 LPM).
Typical accuracy is 2.5 percent (accuracy can vary to 5 percent). Reducer bushings provide versatility for use with 1-inch or 0.75-inch line sizes.
Can be mounted on hose end for easy meter reading. Powered by two field replaceable AAA batteries.
Features one cumulative and one resettable batch total. For use with gasoline (gasohol up to E15), diesel fuel (bio-diesel blends up to B100) and kerosene.
Wetted materials: aluminum housing, nylon rotor, ceramic bearings, tungsten carbide shaft, 316 stainless steel rings and zinc plated steel bushings.
PRODUCT INFORMATION
The GPI 01A31GM digital turbine flowmeter is made from durable cast aluminum and features an LCD display that is accurate to +/-5 percent of reading.
This economical turbine meter is designed for flow rates from 3 to 30 GPM and is factory calibrated in gallons for use with diesel, gasoline or kerosene.
The lightweight 01A31GM mounts easily to the end of a hose and is ideal for use with free flow gravity systems or combined with an electric transfer pump as part of a fuel transfer system.
The GPI 01A31GM digital flow meter comes with two 0.75-inch reducers to work with either 1-inch or 0.75-inch line sizes, 0.75-inch MNPT pipe nipple and two standard AAA batteries.
GENERAL INFORMATION
Congratulations on receiving your GPI fuel meter.
This meter is designed for use only with gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20), biodiesel (B100) and kerosene.
Do NOT use it with water, chemicals or for measuring fluids into aircraft.
This meter is not legal for trade applications.
The 01A Series meter is very sensitive to electrical “noise” and may not operate correctly if located near some electrical equipment.
This meter has a permanent factory calibration for measuring gasoline, diesel fuel or kerosene. If installed and used correctly, you can expect accuracy within ±5%.
INSTALLATION
Install the meter at the end of the hose adjacent to the nozzle or horizontally or vertically in-line. Make sure all threaded fuel connections are wrapped with three to four turns of thread tape or pipe thread sealant approved for use with petroleum fuels.
Make sure the tape does not intrude into the flow path.
Attach the meter to the hose with the arrow on the outlet port pointed in the direction of flow.
Use fittings as necessary.
Use a wrench at the housing ends to tighten the meter.
OPERATIONS
This meter will turn on automatically when it senses fuel flow.
It can manually be turned on by pressing the DISPLAY button (“DISPLAY”).
The meter will show the total from its last use.
The meter turns off automatically if not used for about one minute.
TOTALS
This meter maintains two totals:
The batch total (“TTL1”) may be reset to zero and measures flow during a single use.
The cumulative total (“TTL2”) provides continuous measurement and may not be manually reset. When the cumulative total reaches a maximum reading of 9999, it automatically resets to zero.
Press the DISPLAY button (“DISPLAY”) briefly to switch between TTL1 and TTL2. With TTL1 showing, hold the DISPLAY button down for three seconds to zero the batch total.
Specifications for this item
Part Number
01A31GM
Number of Items
1
Maximum Pressure
300 pounds_per_square_inch
Specification Met
CE
Body Material
Aluminum
Brand Name
GPI® The Proven Choice®
For use with what product?
Petroleum Products, Fuels, Lubricants
Inlet Connection Size
1 unknown_modifier
Inlet Connection Type
NPT thread
Material
Aluminum
Maximum Flow Rate
30 gallons_per_minute
Maximum Temperature
130 degrees_fahrenheit
Measurement Accuracy
+/-5%
Minimum Flow Rate
3 gallons_per_minute
Model Number
01A31GM
Outlet Connection Size
1 unknown_modifier
Outlet Connection Type
NPT thread
Size
1" FNPT
Temperature Range
14 to 130 degrees_fahrenheit
UNSPSC Code
41112501
Thank you for purchasing your new
We ship to lower 48 states only. We cannot combine shipping and there is no local pickup. We cannot ship to military addresses or PO Boxes.
Please contact us through eBay messaging only.