Sensirion SLG-0075 Ultra Low Liquid Flow Meter Sensor 5000 nl/min Thermo Dionex

Description

NEW unused clean condition Working / WARRANTY
Sensirion SLG-0075 Liquid Flow Meter Sensor 5000 nl/min Ultra Low
Thermo Scientific Dionex
Sensirion Ultra Liquid Flow Meter Sensor for Chromatography UHPLC
Part No: SLG-0075
Flow Rate Max 5000 nl/min
Note: Multi-Quantity are avail, pictures show one of the actual units, all are in similar conditions,
Buyer receives only what pictures show
Fast / Safe / FREE Domestic Shipping
INV# UP4B1021
Liquid Flow Meter SLG Series For Ultra-Low Flow Rates and UHPLC
The SLG liquid flow meters are the perfect solution for dynamic liquid flow monitoring in cutting edge Ultra-High-Pressure Liquid Chromatography (UHPLC) and other applications requiring precise measurement of ultra-low flow rates.
A highly sensitive CMOSens® microchip detects the mass flow through the wall of the fused silica flow channel. The flow channel withstands pressures up to 1200 bar / 17500 psi. At the same time the response time for measurements is 40 ms only. The combination of these properties enables the high-end devices of the SLG series to be especially suited for monitoring dynamic flow rates in cutting-edge chromatography systems. Great repeatability for analyses - the most important criterion in HPLC and microfluidic systems - is ensured. The maximum flow rate of the SLG-0075 is 5 µl/min in precision mode and 20 µl/min in extended mode. The SLG-0025 provides reliable liquid flow measurements down to 70 nl/min and even below. The SLG-0150 completes the SLG series with a slightly higher flow range than the SLG-0075, at a reduced pressure drop. It is the first choice for laboratory setups and leakage detection at moderate pressures up to 500 bar.
Features
Three sensors versions with maximum flow rates of 1.5, 5.0, or 8.0 µl/min, extended range of the SLG-0075 up to 20 µl/min.
Ultra low flow detection with 0.5 nl/min resolution
Repeatability better than 0.6% of the measured value
Response time: 40ms
Media isolated, ultra high pressure resistance up to 1200 bar / 17500 psi
Inert wetted materials: Flow path made of fused silica and PEEK sealing
Stainless steel fittings for 1/16" OD tubing
Calibrated RS485 interface, 0-10 V analog output, or I
2
C
Applications
Ultra High Pressure Liquid Chromatography, LC/MS
High-pressure/ultra-low flow analytical instruments and life science applications
Leakage testing
Microfluidics